Governor usage issues
@moluav wrote: Recently I tried to control my oil engine using the APM flight control internal governor, but I found a difference from the commercial flight control control i’ve used before. Through...
View ArticleClik here to view.
Micro Traditional Helicopter with optical flow,RPM Sensors,LiDAR rangefinder
@huaji wrote: I made this aircraft based on the toy helicopter WLtoys V922.I use F4V3 as the main control board with some circuit modification to work with 1S battery.I changed main motor to 1020...
View ArticleLittle help needed for my first arducopter setup on a Blade 450
@ninja_zx11 wrote: Hi all, I just finished installing arducopter on my Blade 450 3D with a flybar.Flight controller is omnibusF4V3Pro and everything is working as it should including throttle...
View ArticleClik here to view.
Helicopter lost control in stabilize mode and crashed.Log attached
@ninja_zx11 wrote: Hi all, I am new to arducopter heli setup and recently installed OmnibusF4V3Pro board on my blade 450 with a flybar. Did maiden yesterday and everything was fine in stabilized...
View ArticleHelicopter throttel cut off (CH8) during a mission
@Loren_DS wrote: Hi everybody, during a mission my helicopter cut off throttel and i don´t know why. The cut was between the minute 13:15 and 13:16. Attached log an Tlog. Any help will be appreciated....
View ArticleIs AUTOTUNE for TRADITIONAL HELICOPTER in sight?
@FRED_GOEDDERT wrote: I have watched a most interesting video regarding the subject above and other interesting development. A very impressive presentation from Bill Geyer there to see. Please click...
View ArticleUnexpected 450 heli crash (log included)
@Zaquron wrote: Hello everyone! I’m fairly new to this forum (and Ardupilot software) so please excuse my ignorance. Yesterday after a lot of trial and error i did a test flight with my KDS 450 heli...
View ArticleSudden engine shutdown, what causes?
@Ricoman wrote: Hello everybody. The man flying my helicopter this time experienced a sudden engine shutdown. As a result of the inspection, it was confirmed that the connecting rod was damaged. I am...
View ArticleHow to control throttle by a pot on a transmitter?
@ninja_zx11 wrote: Hi all, I would like to control my throttle value by using a pot on my QX7 transmitter running openTx. In other words,I want to start a motor on my helicopter with a flip of a...
View ArticleClik here to view.
6v servos with a Pixhack v3x
@jok250 wrote: Hi there, After discovering this project and having been reading around for a while I’ve have decided to bring my old Trex 600 Nitro back to life with Ardupilot and a Pixhack v3x...
View ArticleMatek 765 flight controller
@Dennis1 wrote: Hello i am coming back to adrupilot after a long time away, I wish to fly traditional helicopter with a flight controller i purchased a Matek 765 wing board the matek web site had a...
View ArticleHelicopter compass problems with HERE+ on a mission
@Loren_DS wrote: Hi, My helicopter run perfect at ACRO / ATTI / LOITER, but when I execute a mission this happens: I have tried all the options: have put HERE+ in nose. have put HERE+ at tail boom. I...
View ArticleClik here to view.
Helicopter Toilet Bowl Effect
@White wrote: Hello guys. I have Helicopter class 700 with rotor three blades. I hava problem toilet bowl effect in mode Loiter. The helicopter it’s after PID tuning. I put logs and parameters. Please...
View ArticleLots of error messages including ekf variance,GPS glitch etc.Logs attached
@ninja_zx11 wrote: Hi all, Its my first traditional helicopter build on Blade 450 3D with a flybar.Heli was flying fine before installing arducopter.Board is OmnibusF4V3Pro running latest stable...
View ArticleClik here to view.
Align 450 Toilet Bowl Effect in loiter (DF log attached)
@wcfung1 wrote: I am running a 450 size FBL heli with APM2.6, copter v3.2.1 which is the last version that supports APM. During loiter, it experiences toilet bowl effect. I attach the log with photo...
View ArticleDJI Ace One autopilot
@SimonOakes wrote: Greetings, sorry if this is in the wrong place. I know Ace One is not actually Ardupilot. A few years ago I was given two RC Helis from my workplace, a Raptor 50 and a JR Propo...
View ArticleClik here to view.
Pixhack v3x EKF warnings
@Matthias wrote: hey folks, i’ve bought and installed the pixhack v3x as @ChrisOlson kindly recommended to me. all is working nicely as i can see. but i recognised some EKF issues at the bench. not in...
View ArticleWould like to make a request to add warning about analog servo refresh rate...
@ninja_zx11 wrote: Hi all, I would like make a request to add warning about analog servo refresh rate after finding my stupid mistake of using Analog servos. In the docs, it says digital servos are...
View ArticleClik here to view.
Problem with tandem yaw tunning
@moluav wrote: i am tunning a tandem helicopter.Now it is good to fly in the stabilize mode. The roll and pitch flight is also good in the alihod mode and loiter mode, but the problem of yaw...
View Article800 size Gasoline Heli - Pos Hold Help needed
@Adi_Fly wrote: Hello All, I have setup a Bergen Intripid EB gasser heli (flybar head) on a Pixhawk 2 cube. I have setup the heli exactly the same way as Chris Olsen’s videos. This is my second heli...
View Article